Goot BS-2 Leadfree Tip Cleaner/Refresher

Supplied in 9gm tin

When the tip surface starts to oxidize during operation, it becomes dark and does not wet properly. To improve work efficiency, use the Goot Tip Refresher.

Optimum tip temperature for refreshing the tip is from 300-360°C.

Apply solder to the tip and then clean completely with the sponge on the soldering iron stand.

Apply solder to the tip again. The tip is now tinned and wetting is restored. If the tip is still not wetting properly, repeat process.

Note: If Soldering is done on a PCB while the Tip Refresher still remains on the tip, the Tip Refresher will stick to the PCB and may corrode the PCB. Make sure you completely remove all the Tip Refresher with a sponge before soldering.